The grade catalogue
Thirteen published grades across three families — every specification verbatim from the technical data sheet, each with its own page and downloadable data sheet.
Atomised Aluminium Powder — TALTOM®
Seven grades, 99% Min aluminium throughout. Fatty-acid coating available per customer requirement.
TALTOM® Standard SF
General-purpose atomised aluminium powder — the standard fine grade of the TALTOM® family.
View this grade →TALTOM® SF-200
Finer atomised grade — 95% Min passing (-200) mesh for applications demanding tighter particle distribution.
View this grade →TALTOM® Dust Coated
Atomised dust grade with fatty-acid coating (2% Max), applied as per customer requirement.
View this grade →TALTOM® Dust
Fine atomised aluminium dust — 80% Min passing (-325) mesh.
View this grade →TALTOM® CR 1030
Coarse atomised grade of the CR series — -10 mesh = 100%, +30 mesh = 80%.
View this grade →TALTOM® CR 3060
Coarse atomised grade of the CR series — -30 mesh = 90%, +100 mesh = 95%.
View this grade →TALTOM® CR 3080
Coarse atomised grade of the CR series — -30 mesh = 90%, +100 mesh = 95%.
View this grade →Flake Aluminium Powder — TALFLAKE® / TALPH® / TALCRETE®
Pyrotechnic, paint and AAC gas-forming flake grades.
TALFLAKE® Explo Standard
Pyrotechnic flake aluminium powder — high water coverage area and controlled fatty matter for explosive and firework compositions.
Application: Pyrotechnics & Explosives
View this grade →TALPH® Standard
Coarse-grade flake aluminium powder for aluminium phosphide production.
Application: Paints & Pigments
View this grade →TALCRETE® NP
Gas-forming flake grade for AAC block production — 100% water-miscible, 72 ml Min hydrogen evolution in 10 minutes.
Application: AAC Concrete Blocks
View this grade →TALCRETE® 80
Gas-forming flake grade for AAC blocks — 87% Min metallic aluminium, 85 ml Min hydrogen evolution in 10 minutes.
Application: AAC Concrete Blocks
View this grade →TALCRETE® 90
Finest TALCRETE® gas-forming grade — 94% Min metallic aluminium for AAC block production.
Application: AAC Concrete Blocks
View this grade →Aluminium Paste — TALPASTE®
Leafing paste for metallic-finish paints and coatings.
TALPASTE® M-12L
Leafing aluminium paste for metallic-finish paints and protective coatings — 75% Min leafing value, 20,000 cm²/g Min water coverage area.
Application: Paints & Coatings
View this grade →Quality is the prime objective
Every batch is tested against its published grade specification before despatch.
- Every batch tested against the published data sheet parameters — chemistry (aluminium by difference, silicon and iron limits), sieve analysis, and where specified leafing value, water coverage and hydrogen evolution.
- Capacity expanded through process and technology development.
- Supplier of aluminium powder to ISRO, Defence, DRDO & many more.
- Fatty-acid coating and application-specific grade variants developed with customers.
- Technical data sheets available on request for every published grade.
Safe handling of aluminium powder
Safe handling: fine and flake aluminium powders are combustible and, in dust suspension, potentially explosive. Store in sealed containers, dry, away from ignition sources, moisture and oxidisers; ground equipment against static discharge; follow the applicable safety data sheet for all handling, storage and transport. TDS & MSDS available on request — info@tankeshwari.com.